P7000 Line Matrix FAQ

P7000 Consumables FAQ

P7000 FAQ for P5000 Users

P7000 Integrated Print Management FAQ

P7000 Zero Tear FAQ

New Line Matrix Ribbon Family

New ribbon family is priced to match customer’s print volume and budget

Front Tray

For applications that demand mobility, a front paper shelf allows the source paper to move with the printer. Also, raising the paper off the floor helps protect the media from damage. This shelf is strong enough and low enough to support a full box of paper.
Pedestal Only

Low Rear Tray

This output tray is ideal for large print runs. An adjustable back bar keeps the paper aligned and neat even when stacking large quantities.
Pedestal Only

High Rear Tray

This tray is ideal for applications where the printer is placed up against a wall and output stacks are limited to short runs. Since the tray is located near the top of the printer, access from the front is easy.
Pedestal Only

Front Paper Access

This innovative option allows you to load paper and retrieve output from the front of the printer. This dramatically reduces the space required by the printer, since the rear can now be pushed into a corner or up against the wall (a minimum clearance of 4” must remain for the top cover to open). The adjustable front shelf allows you to select the correct balance between size of source stack and size of stack that can be retrieved from the rear.
Cabinet Only

SureStak Power Stacker

Some forms that do to not refold well or tend to fluff up during printing may not stack properly with the passive stacking aids found in the standard quiet cabinet models. For these applications, a SureStak power stacker option is available. This device actually pulls the printed paper over the top of the print path and pushes it down into the stacking area. There, a series of paddle wheels actually refold the forms tightly, so even the toughest forms can be printed and stacked neatly up to a full box.
Cabinet only

Acoustic Shroud

This assembly mutes the sound emanating from the paper exit slot to quiet the printer by a significant 4 dBA. This is an ideal solution for any pedestal printer operating near people trying to work. The shroud features a self-guiding paper path and easy tilt away design for ready access to the media.
Pedestal Only

Extended Forms Support Door Kit

Quiet cabinet models cannot be quiet if forms are too large to allow the doors to shut. To solve this problem, the P7000 can be equipped with optional extended doors. Kits are available with one or two extended doors to fit your application. A single extended door will support forms up to 14” in length. Two doors will allow up to 17” long forms to fit inside with all door closed.
Cabinet Only